NSN 5320-01-701-1721 · NIIN 017011721 · FSC 5320
NO DASHES 5320017011721
In Stock
PIN-RIVET
Rivets
Application: F/A-18 C/D
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.365 AND INCHES MAXIMUM 1.385 |
| AASK | HEAD STYLE | |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.160 AND INCHES MAXIMUM 0.180 |
| AGAV | END ITEM IDENTIFICATION | F/A-18 C/D |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.870 AND INCHES MAXIMUM 0.890 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN-RIVET,THREADED,TENSION,100 DEG C-SUNK HEAD,HEX POINT DRIVER,FOR SEALANT APPLICATION |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.6287 AND INCHES MAXIMUM 0.6335 |
| AAJD | THREAD CLASS | 3A |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.1330 AND INCHES MAXIMUM 0.1350 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.3125 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 210000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2700,-ETHOD 1 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| AAZF | SHANK STYLE |