NSN 5320-01-241-0848 · NIIN 012410848 · FSC 5320
NO DASHES 5320012410848
In Stock
PIN-RIVET
Rivets
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.615 AND INCHES MAXIMUM 1.635 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.1430 AND INCHES MAXIMUM 0.1500 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1295 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MAXIMUM 0.6335 |
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP AND SOLID FILM |
| ANEE | GRIP LENGTH | INCHES MAXIMUM 1.130 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 210000 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.312 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| FEAT | SPECIAL FEATURES | 0.138-32UNJC-3B THREADED CONCENTRIC HOLE ALONG THE LONGITUDINAL CENTERLINE OF HEAD END 0.300 IN. MIN,0.345 IN. MAX DP,0.120 IN. SLOT LG,0.060 IN. SLOT W LOCATED 0.860 IN. FROM TOP OF HEAD TO BEGINNING OF SLOT |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |