NSN 5320-01-735-6263 · NIIN 017356263 · FSC 5320
NO DASHES 5320017356263
In Stock
PIN-RIVET
Rivets
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZF | SHANK STYLE | |
| AAZE | SHANK DIAMETER | OVERALL INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| ANEE | GRIP LENGTH | OVERALL INCHES MINIMUM 1.0575 AND INCHES MAXIMUM 1.0675 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | OVERALL INCHES MINIMUM 1.5525 AND INCHES MAXIMUM 1.5725 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | OVERALL INCHES MINIMUM 0.1330 AND INCHES MAXIMUM 0.1350 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1295 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL INTERNATIONAL STD/SPEC SINGLE TREATMENT RESPONSE A-S2700,-ETHOD 1 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 210000 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.3125 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN-RIVET, THREAD, TENSION, 100 DEGREES C'SUNK HEAD HEX POINT DRIVE, FOR SEALANT APPLICATION |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAZG | HEAD MAJOR DIAMETER | OVERALL INCHES MINIMUM 0.6287 AND INCHES MAXIMUM 0.6335 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S5629 |
| FEAT | SPECIAL FEATURES | INTERNAL TAPPED HOLE SHALL BE 0.1380-32 UNJC-3B, EXCEPT PITCH DIAMETER SHALL BE 0.1204 -0.1177. THREAD CREST DISCONTINUITIES ARE PERMISSIBLE, HOWEVER, THE INTERNAL THREAD SHALL BE CAPABLE OF SUPPORTING 500 LBS IN TENSION;DISTANCE FROM HEAD TO INJECTION PORT IS 0.86 |