NSN 5306-01-144-3908 · NIIN 011443908 · FSC 5306
NO DASHES 5306011443908
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 2.215 AND INCHES MAXIMUM 2.265 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 5.037 AND INCHES MAXIMUM 5.067 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.425 AND INCHES MAXIMUM 0.445 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.750 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.089 AND INCHES MAXIMUM 0.109 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.060 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4365 AND INCHES MAXIMUM 0.4370 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.802 AND INCHES MAXIMUM 2.822 |
| ASXK | HOLE QUANTITY | 2 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CRHC | HOLE CONFIGURATION STYLE | |
| FEAT | SPECIAL FEATURES | POINT ON THD END 0.370 IN. LG BY 15 DEG |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112 FSC- 76301 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |