NSN 5307-01-186-7185 · NIIN 011867185 · FSC 5307
NO DASHES 5307011867185
In Stock
STUD,SHOULDERED
Studs
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | STUD THREAD INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.340 |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 0.305 AND INCHES MAXIMUM 0.345 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.377 |
| AAVK | SHOULDER LENGTH | INCHES MINIMUM 0.064 AND INCHES MAXIMUM 0.074 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.813 AND INCHES MAXIMUM 0.873 |
| ADDB | NUT END SHANK LENGTH | INCHES MINIMUM 0.057 AND INCHES MAXIMUM 0.067 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.190 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.190 |
| CSJZ | STUD END SHANK LENGTH | INCHES MINIMUM 0.057 AND INCHES MAXIMUM 0.067 |
| CSXH | STUD END SHANK DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| CSYM | SURFACE FINISH | SHOULDERS MICROINCHES 32.0 |
| CTDT | NUT END SHANK DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| FEAT | SPECIAL FEATURES | INTERNAL HEX DRIVE IN STUD END |
| MATT | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 3 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |