NSN 5315-01-627-0273 · NIIN 016270273 · FSC 5315
NO DASHES 5315016270273
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Application: F-15SA
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | INCHES 0.2500 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| CRDY | FIRST END LOCATION | THREADED END |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AGAV | END ITEM IDENTIFICATION | F-15SA |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.030 |
| AMFM | SECOND END TAPER LENGTH | INCHES NOMINAL 0.120 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.405 |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.717 |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.837 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 0.995 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, INDEX |
| MATT | MATERIAL | OVERALL STEEL COMP 302 OR STEEL COMP 303SE OR STEEL COMP 304 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE QQ-S-763 OR MFR REF SINGLE MATERIAL RESPONSE --S 265 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSGL | SECOND END TIP RADIUS | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.090 |