NSN 5315-01-213-4927 · NIIN 012134927 · FSC 5315
NO DASHES 5315012134927
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.625 |
| AATR | SHANK LENGTH | INCHES MINIMUM 1.117 AND INCHES MAXIMUM 1.125 |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | INCHES NOMINAL 0.875 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.3710 AND INCHES MAXIMUM 0.3730 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.055 AND INCHES MAXIMUM 2.063 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.053 |
| AMFM | SECOND END TAPER LENGTH | INCHES MINIMUM 0.681 AND INCHES MAXIMUM 0.685 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.437 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.4365 AND INCHES MAXIMUM 0.4370 |
| CRDY | FIRST END LOCATION | THREADED END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSGL | SECOND END TIP RADIUS | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.090 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 0.813 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 303SE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL MATERIAL RESPONSES AST- A582 COND B OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-763,COND B OR MFR REF 3RD MATERIAL RESPONSE --S265,FSC- 76301 COND B |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |