NSN 5315-01-718-5746 · NIIN 017185746 · FSC 5315
NO DASHES 5315017185746
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Application: F-15EX
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | F-15EX |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.180 AND INCHES MAXIMUM 1.220 |
| STYL | STYLE DESIGNATOR | |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439 |
| CRDY | FIRST END LOCATION | THREADED END |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 44.5 AND DEGREES MAXIMUM 45.5 |
| CWAS | SECOND SHANK LENGTH | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.470 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.020 AND INCHES MAXIMUM 0.040 |
| AMFM | SECOND END TAPER LENGTH | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.220 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 125000 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.2195 AND INCHES MAXIMUM 0.2200 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.395 AND INCHES MAXIMUM 0.415 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2700, -ETHOD 1 |
| AATR | SHANK LENGTH | INCHES MINIMUM 0.645 AND INCHES MAXIMUM 0.665 |
| AAHP | SECOND END STYLE | |
| AAGZ | FIRST END STYLE |