NSN 5305-01-701-1912 · NIIN 017011912 · FSC 5305
NO DASHES 5305017011912
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F/A-18 C/D
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.1775 AND INCHES MAXIMUM 1.1975 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-DTL 595 |
| AGAV | END ITEM IDENTIFICATION | F/A-18 C/D |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.5625 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.735 AND INCHES MAXIMUM 1.765 |
| CBBL | FEATURES PROVIDED | O RING |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.4375 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-DTL-595 H19-8-O |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 125000 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJD | THREAD CLASS | 3A |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,CLOSE TOLERANCE-ASSEMBLY 100 DEG COUNTERSUNK SELAING HEAD,DOVETAIL SLOT,SPECIAL THRAD LENGTH,CRES (125 KSI FSU) |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.8812 AND INCHES MAXIMUM 0.8884 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.188 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4365 AND INCHES MAXIMUM 0.4370 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CMLP | THREAD QUANTITY PER INCH | 20 |