NSN 5340-00-075-4900 · NIIN 000754900 · FSC 5340
NO DASHES 5340000754900
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.310 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| AHQP | FIRST LEG CORNER RADIUS | INCHES NOMINAL 0.310 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.310 |
| AJFQ | SECOND LEG END RADIUS | INCHES NOMINAL 0.380 |
| AHQW | FIRST LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.919 |
| AHQX | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES NOMINAL 0.031 |
| AHQY | FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.959 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.345 AND INCHES MAXIMUM 0.350 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.380 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.160 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.160 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 2.539 |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.880 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 1.230 |
| SFTT | SURFACE TREATMENT | PAINT |
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-18729 |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 170.0 |
| MATT | MATERIAL | STEEL COMP 4130 |