NSN 5945-00-200-9306 · NIIN 002009306 · FSC 5945
NO DASHES 5945002009306
In Stock
RELAY,ELECTROMAGNETIC
Relays and Solenoids
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| AKDX | WINDING QUANTITY | 1 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.415 |
| CSXF | OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP | SINGLE WINDING VOLTS DC 25 DEG CELSIUS 13.5 |
| CTDL | MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | INDUCTIVE LOAD AMPERES DC 1.0 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SECOND MOUNTING FACILITY UNTHREADED HOLE(S) 4 |
| BBRG | STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.699 |
| CQYJ | MOUNTING FACILITY PATTERN | SECOND MOUNTING FACILITY RECTANGULAR |
| CRNG | NONPILE-UP MAIN CONTACT ARRANGEMENT | POLE, DOUBLE THROW, ONE POSITION MOMENTARY 4 |
| CRPQ | NOMINAL OPERATING CURRENT RATING AND TYPE | SINGLE WINDING MILLIAMPERES DC 27.0 |
| APCN | COIL QUANTITY | 1 |
| APNA | WINDING DC RESISTANCE RATING | SINGLE WINDING OHMS MINIMUM 450.0 AND OHMS MAXIMUM 550.0 |
| APNP | DUTY TYPE | CONTINUOUS |
| APNQ | ARC QUENCHING METHOD | AIR |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | FIRST MOUNTING FACILITY PLUG-IN TERMINAL(S) 1 |
| CTDL | MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | RESISTIVE LOAD AMPERES AC 1.0 AND AMPERES DC 2.0 |
| CWAB | MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | AC 115.0 AND DC 28.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | ALL FUNCTIONS PIN 14 |
| CRXH | TIME DELAY | FIXED RELEASE TIME SECONDS MAXIMUM 0.005 |
| ADZC | ENVIRONMENTAL PROTECTION | HERMETIC AND SHOCK RESISTANT |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | SECOND MOUNTING FACILITY INCHES MINIMUM 0.091 AND INCHES MAXIMUM 0.101 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.610 |
| CRXH | TIME DELAY | FIXED OPERATE TIME SECONDS MAXIMUM 0.006 |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 0.810 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | SECOND MOUNTING FACILITY INCHES MINIMUM 1.195 AND INCHES MAXIMUM 1.205 |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | SECOND MOUNTING FACILITY INCHES MINIMUM 0.395 AND INCHES MAXIMUM 0.405 |
Supersedes
This item replaces cancelled NIIN 010060057. An older drawing citing one of those numbers resolves here.