NSN 5910-00-199-5025 · NIIN 001995025 · FSC 5910
NO DASHES 5910001995025
In Stock
CAPACITOR,FIXED,CERAMIC DIELECTR
Capacitors
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBQ | CAPACITANCE VALUE PER SECTION | PICOFARADS SINGLE SECTION 33000.000 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 150.0 |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION 0.0 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES MINIMUM 0.369 AND INCHES MAXIMUM 0.431 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.500 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.200 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.500 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.500 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 100000.0 |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 2.0000 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| MATT | MATERIAL | CASE PLASTIC |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -1.00 TO 1.00 |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -30.0 TO 30.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 100.0 |
Supersedes
This item replaces cancelled NIIN 003516315. An older drawing citing one of those numbers resolves here.