NSN 3120-00-225-2305 · NIIN 002252305 · FSC 3120
NO DASHES 3120002252305
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER ROUND |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| MATT | MATERIAL | OUTER LAYER STEEL UNS J03008 |
| STYL | STYLE DESIGNATOR | |
| CTTG | RIGHT END BODY DIAMETER | INCHES NOMINAL 8.0000 |
| MATT | MATERIAL | INNER LAYER TIN ALLOY UNS L13840 |
| BZLX | CORNER SHAPE | CENTER FLANGE OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | CENTER FLANGE RIGHT BODY CORNER ROUND |
| CTSN | LEFT END BODY DIAMETER | INCHES NOMINAL 8.0000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 8.0000 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 10.0200 AND INCHES MAXIMUM 10.0420 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 16.4980 AND INCHES MAXIMUM 16.5000 |
| AGFF | FLANGE WIDTH | INCHES NOMINAL 4.0000 |
| AGKH | LUBRICANT ACCOMMODATION STYLE | |
| AJFM | END TO FLANGE DISTANCE | INCHES NOMINAL 2.0000 |
| CSYM | SURFACE FINISH | LEFT END SURFACE OF FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF FLANGE MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF BODY MICROINCHES 250.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF FLANGE MICROINCHES 125.0 |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER ROUND |
| BZLX | CORNER SHAPE | CENTER FLANGE OUTSIDE LEFT CORNER SQUARE |
| AAUB | HOLE DIAMETER | FIRST INCHES NOMINAL 0.5310 |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| CSYM | SURFACE FINISH | INSIDE DIAMETER SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | LEFT END SURFACE OF BODY MICROINCHES 250.0 |
| BZLX | CORNER SHAPE | CENTER FLANGE LEFT BODY CORNER ROUND |
| CTJM | ANTIROTATION/LUBRICATION TYPE AND QUANTITY | HOLE 2 |
| CTMQ | SURFACE GROOVE LOCATION AND QUANTITY | INTERNAL 2 |