NSN 4720-00-063-4843 · NIIN 000634843 · FSC 4720
NO DASHES 4720000634843
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| CQRB | SEAT ANGLE | SECOND END DEGREES 12.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 45.0 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1500.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 12.0 |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 7500.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.375 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.375 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 78570, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT FINE (UNJF) |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 47.0 |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 6.245 |
| FEAT | SPECIAL FEATURES | FLIGHT SAFETY CRITICAL |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.110 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.273 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.000 |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
Supersedes
This item replaces cancelled NIIN 009085090. An older drawing citing one of those numbers resolves here.