NSN 4020-01-707-7264 · NIIN 017077264 · FSC 4020
NO DASHES 4020017077264
In Stock
CORD ASSEMBLY,ELASTIC
Fiber Rope, Cordage, and Twine
Technical characteristics
4 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL |
| FEAT | SPECIAL FEATURES | REEL CONSIST OF TWO 4 INCH BY ONE QUARTER INCH THICK CIRCULAR DISKS AND A ROUND REEL CORE THAT IS 1.47 INCH DIAMETER AND 1.3 INCH LONG. THE DISTANCE BETWEEN THE TWO OUTTER 4 INCH DISKS ON EACH SIDE WITH 3 SQUARE DRIVE FLAT HEAD CAP SCREW. THE CENTER OF THE KNOB IS APPROXIMATELY .63 INCHES FROM THE OUTSIDE OF THE 4 INCH DISK. REEL HANDLE IS BLACK IN COLOR. REEL HANDLE IS BLACK IN COLOR. REEL HANDLE SHALL BE 4.7 INCHES BY 1 INCH WITH AN OBLONG HOLE WHERE THE OPERATORS FINGERS WILL GRASP THE HANDLE. THE REEL HANDLE HAS A LINE GUIDE THAT EXTENDS OVER THE 1.3 INCH GAP BETWEEN THE TWO 4 INCH DISKS. THE REEL HANDLE HAS A KNURLED THUMB SCREW THAT PASSES THROUGH THE REEL HANDLE PROVIDING FRICTION ON THE OUTTER EDGE OF THE REEL. THE THUMB SCREW IS INTERCHANGEABLE TO EITHER SIDE OF THE HANDLE. LINE: COLOR IS SUBJEC TO AVAILABILITY. LINE HAS A LOAD BEARING OF AT LEAST 400 POUNDS OR EQUAL. LINE IS ATTACHED CARABINER WITH HEAT SHRINK AROUND THE KNOT. |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 4.0 |
| HUES | COLOR | BLACK |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| EOD-SPWRGL1 | 6VW15 |
| SP-6 | 78HX0 |