NSN 4030-00-580-6794 · NIIN 005806794 · FSC 4030
NO DASHES 4030005806794
In Stock
TERMINAL,WIRE ROPE,STUD
Fittings for Rope, Cable, and Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.063 AND INCHES MAXIMUM 0.068 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.675 AND INCHES MAXIMUM 3.801 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.133 AND INCHES MAXIMUM 0.139 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.453 AND INCHES MAXIMUM 0.547 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHNK | ACCOMMODATED MATERIAL DIAMETER | INCHES NOMINAL 0.094 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.250 |
| BZQQ | BREAKING STRENGTH | POUNDS (LB) MINIMUM 920.0 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD ALL MATERIAL RESPONSES 66 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ADCR | PLAIN SHANK LENGTH | INCHES MINIMUM 1.188 AND INCHES MAXIMUM 1.250 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| ADCS | PLAIN SHANK DIAMETER | INCHES MINIMUM 0.213 AND INCHES MAXIMUM 0.218 |
| AAJD | THREAD CLASS | 3A |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.119 |
| MATT | MATERIAL | STEEL COMP 303SE AND STEEL COMP 305 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 650L3RH | 22277 |
| NAS650L3RH | 80205 |
| MIL-DTL-781 | 81349 |
| AN669L3RH | 88044 |
| AN669FL3RH | 88044 |
| MS21260L3RH | 96906 |
Supersedes
This item replaces cancelled NIIN 001329221. An older drawing citing one of those numbers resolves here.