NSN 5935-01-177-9084 · NIIN 011779084 · FSC 5935
NO DASHES 5935011779084
In Stock
CONNECTOR,PLUG,ELECTRICAL
Connectors, Electrical
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.594 |
| ADMW | BODY ANGLE IN DEG | 135.0 |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND SHOCK RESISTANT AND COLD RESISTANT AND HEAT RESISTANT AND EXPLOSION PROOF |
| AFQJ | CABLE ENTRANCE DIAMETER | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.750 |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING REMOVABLE |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 73.0 |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 |
| AFRE | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 700.0 |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING RING |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP |
| AKEZ | DISTANCE FROM CENTERLINE TO CONNECTOR END | INCHES MAXIMUM 6.062 |
| AKFA | DISTANCE FROM CENTERLINE TO CABLE END | INCHES MAXIMUM 3.688 |
| AWTN | OPERATING TEMP RATING | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 175.0 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.375 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING SILVER |
| CQZG | INSERT MATERIAL | SINGLE MATING END RUBBER SILICONE CLASS Q |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING CRIMP |
| CSPT | SHELL MATERIAL | ALUMINUM |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE AND NICKEL |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC 1ST TREATMENT RESPONSE QQ--416,TY 2,CL 3 AND FED SPEC 2ND TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| CXCG | INCLUDED CONTACT QUANTITY | 4 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND SOCKET |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | SILVER GRAINS, TROY 0.020 |
| PRMT | PRECIOUS MATERIAL | SILVER |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-5015 |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S3409 |
Supersedes
This item replaces cancelled NIIN 010877491. An older drawing citing one of those numbers resolves here.