NSN 5315-01-332-2265 · NIIN 013322265 · FSC 5315
NO DASHES 5315013322265
In Stock
PIN,STRAIGHT,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES NOMINAL 0.156 |
| ABRD | SECOND HOLE DIAMETER | INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.382 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 3.250 |
| ABRF | CENTER TO CENTER DISTANCE BETWEEN HOLES | INCHES NOMINAL 6.875 |
| ACHT | PIN OVERALL LENGTH | INCHES MINIMUM 10.844 AND INCHES MAXIMUM 10.906 |
| ACHU | PIN OVERALL DIAMETER | INCHES MINIMUM 1.9720 AND INCHES MAXIMUM 1.9790 |
| AKTX | FIRST END COUNTERBORE DIAMETER | INCHES NOMINAL 0.875 |
| AKTY | SECOND END COUNTERBORE DIAMETER | INCHES MINIMUM 1.001 AND INCHES MAXIMUM 1.002 |
| AKTZ | FIRST END COUNTERBORE DEPTH | INCHES NOMINAL 0.625 |
| AKVA | SECOND END COUNTERBORE DEPTH | INCHES NOMINAL 3.000 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.500 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 15.0 |
| FEAT | SPECIAL FEATURES | ADDITIONAL HOLE IN. DIA BY 4.500 IN. DEEP,LOCATED 4.250 IN. FROM 1ST END; 1ST END HOLE THREADED 0.125 NPT |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |