NSN 5340-01-220-3137 · NIIN 012203137 · FSC 5340
NO DASHES 5340012203137
In Stock
BRACKET,DOUBLE ANGLE
Hardware, Commercial
Application: W/S:ENGINE, AIRCRAFT, F100 PW220 (F-15C/D/E); ENGINE, AIRCRAFT, F100-PW-100 (F-15A/B/C/D); SUPPORT EQUIPMENT, C-5 AIRCRAFT; AIRCRAFT, EAGLE F-15; ENGINE, AIRCRAFT, F100-PW-200 (F-16A/B/C/D)
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.638 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 0.765 |
| AGAV | END ITEM IDENTIFICATION | W/S:ENGINE, AIRCRAFT, F100 PW220 (F-15C/D/E); ENGINE, AIRCRAFT, F100-PW-100 (F-15A/B/C/D); SUPPORT EQUIPMENT, C-5 AIRCRAFT; AIRCRAFT, EAGLE F-15; ENGINE, AIRCRAFT, F100-PW-200 (F-16A/B/C/D) |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 1.670 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES NOMINAL 0.150 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.261 AND INCHES MAXIMUM 0.271 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.158 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.256 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.188 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.037 AND INCHES MAXIMUM 0.044 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.037 AND INCHES MAXIMUM 0.044 |
| AHPZ | CENTER SECTION HEIGHT | INCHES NOMINAL 1.405 |
| AHQA | CENTER SECTION WIDTH | INCHES NOMINAL 1.670 |
| AHQB | CENTER SECTION THICKNESS | INCHES MINIMUM 0.037 AND INCHES MAXIMUM 0.044 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 1.670 |
| AHQP | FIRST LEG CORNER RADIUS | INCHES NOMINAL 0.250 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 149.7 |
| CSSR | SECOND LEG ANGLE | DEGREES NOMINAL 149.7 |
| FEAT | SPECIAL FEATURES | CENTER OF FIRST LEG RADIUSED INWARD 0.750 IN. |
| MATT | MATERIAL | NICKEL ALLOY X-750 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5542 |
| STYL | STYLE DESIGNATOR |