NSN 5315-01-164-1330 · NIIN 011641330 · FSC 5315
NO DASHES 5315011641330
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.340 AND INCHES MAXIMUM 0.360 |
| AATR | SHANK LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.186 AND INCHES MAXIMUM 0.187 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.742 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.050 |
| AMFM | SECOND END TAPER LENGTH | INCHES MINIMUM 0.020 AND INCHES MAXIMUM 0.035 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| CQTR | SECOND SHANK DIAMETER | INCHES NOMINAL 0.190 |
| CRDY | FIRST END LOCATION | UNTHREADED END |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 15.0 AND DEGREES MAXIMUM 25.0 |
| CTHC | SECOND END TAPER ANGLE | DEGREES MINIMUM 30.0 AND DEGREES MAXIMUM 50.0 |
| CWAS | SECOND SHANK LENGTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| FEAT | SPECIAL FEATURES | INCLUDES THREAD SELF-LOCKING ELEMENT |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S7477 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |