NSN 5307-01-318-8329 · NIIN 013188329 · FSC 5307
NO DASHES 5307013188329
In Stock
STUD,RECESSED
Studs
Application: F100PW0229 ENGINE/FDT MOD
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | STUD THREAD INCHES NOMINAL 0.300 |
| AASA | THREAD LENGTH | NUT THREAD INCHES NOMINAL 0.340 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.589 AND INCHES MAXIMUM 1.591 |
| ADCZ | LENGTH OF RECESSED PORTION OF SHANK | INCHES NOMINAL 0.380 |
| ADDA | DIAMETER OF RECESSED PORTION OF SHANK | INCHES MINIMUM 0.284 AND INCHES MAXIMUM 0.288 |
| AGAV | END ITEM IDENTIFICATION | F100PW0229 ENGINE/FDT MOD |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.375 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.375 |
| FEAT | SPECIAL FEATURES | STUD HAS A 2 SHOULDERS 0.028/0.058 IN. WD X 0.375/0.377 IN. DIA SEPARATED BY A RECESSED AREA THE SAME DIA AS THE ABOVE REFERENCED RECESS;THE AREAS ON EITHER SIDES OF THE SHOULDERS ARE SIMILARLY RECESSED--MAKING 3 RECESSED AREAS IN ALL;THE NUT END IS BEVELED 25 DEG 30 MIN CONICAL AFTER THREADS TOA FINAL DIA OF 0.300/0.310 IN. |
| MATT | MATERIAL | NICKEL ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE WA 92 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNJEF |