NSN 5990-00-963-1799 · NIIN 009631799 · FSC 5990
NO DASHES 5990009631799
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
44 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.8400 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 7.000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.0 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| CQTM | TERMINAL LOCATION | REAR |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 6.50 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.7210 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS NOMINAL 3400.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2460 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4750 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 30.0 |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 20.0 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.3750 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 1.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 25.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 6.40 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 41.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 15.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 23.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6780 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AAQL | BODY STYLE | |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 128.00 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.454 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 14.00 |
Supersedes
This item replaces cancelled NIIN 009005410. An older drawing citing one of those numbers resolves here.