NSN 5305-00-282-4342 · NIIN 002824342 · FSC 5305
NO DASHES 5305002824342
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.166 AND INCHES MAXIMUM 0.183 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.312 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.072 AND INCHES MAXIMUM 0.079 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.037 |
| AAJD | THREAD CLASS | 2A |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.262 AND INCHES MAXIMUM 0.312 |
| ASXK | HOLE QUANTITY | 1 |
| CYAU | SCREW MATERIAL | STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST MATERIAL RESPONSE -IL-S-7720 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-18732 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-7720 OR FED SPEC 4TH MATERIAL RESPONSE QQ-S-763 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASK | HEAD STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
Supersedes
This item replaces cancelled NIINs 002069936 · 002820143 · 005767275 · 006030539. An older drawing citing one of those numbers resolves here.