NSN 3020-01-018-5083 · NIIN 010185083 · FSC 3020
NO DASHES 3020010185083
In Stock
GEAR,WORM WHEEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.3500 |
| AJLA | TEETH QUANTITY | 35 |
| ALPN | FACE TYPE | CONCAVE |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.750 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPL | MATING THREAD LEAD QUANTITY | 2 |
| CWPP | PRESSURE ANGLE | DEGREES 25.0000 |
| CWPZ | HELIX ANGLE | DEGREES 17.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 1.437 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.375 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.625 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.500 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | BOTH ENDS INCHES 1.375 |
| CWWN | END NOMINAL DIAMETER | BOTH ENDS INCHES 3.750 |
| CWWS | FIRST STEP NOMINAL LENGTH | BOTH ENDS INCHES 0.062 |
| CWXB | FIRST STEP NOMINAL DIAMETER | BOTH ENDS INCHES 4.375 |
| FEAT | SPECIAL FEATURES | FIRST END HUB CONTAINS 2 THREADED HOLES,0.375-16 ON A 3.124 IN. BC,180 DEG APART |
| MATT | MATERIAL | OVERALL COPPER ALLOY |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 010185973. An older drawing citing one of those numbers resolves here.