NSN 1650-01-148-2152 · NIIN 011482152 · FSC 1650
NO DASHES 1650011482152
In Stock
MOTOR,HYDRAULIC
Aircraft Hydraulic, Vacuum, and De-icing System Components
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPL | TORQUE LOAD RATING | INCH-POUNDS 384.0 |
| AAUH | SPLINE MINOR DIAMETER | INCHES NOMINAL 0.435 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.572 |
| AAXX | MOUNTING TYPE | FLANGE |
| ABSA | SPLINE QUANTITY | 10 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.354 |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 8000.0 |
| AFFL | MOUNTING BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.785 AND INCHES MAXIMUM 0.815 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.500 |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ASAP | SPLINE PITCH | 20/40 |
| ASMM | CONNECTION QUANTITY | 1 |
| AWLS | CONNECTION TYPE | DRAIN |
| AXFC | CONNECTION DESIGN | THREADED |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | CUBIC INCHES 0.550 |
| AZFE | CONNECTION GOVERNMENT SPEC/STD | MS33649-4 |
| AZFG | MOUNTING BOLT HOLE SPACING | 3.536 BY 3.536 |
| MATT | MATERIAL | HOUSING ALUMINUM ALLOY |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY THE SOURCE CONTROL NO |