NSN 5935-00-816-5247 · NIIN 008165247 · FSC 5935
NO DASHES 5935008165247
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.147 |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| AKMG | NOMINAL THREAD LENGTH | INCHES 0.625 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.500 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END ALL CONTACT GROUPINGS BACK |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END ALL CONTACT GROUPINGS GOLD AND SILVER |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.750 |
| CXCG | INCLUDED CONTACT QUANTITY | 2 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END ALL CONTACT GROUPINGS ROUND PIN |
| AFRV | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.938 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 1.750 |
| CSCF | TERMINAL TYPE | SINGLE MATING END ALL CONTACT GROUPINGS SOLDER WELL |
| CSPT | SHELL MATERIAL | ALUMINUM |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| CXCG | INCLUDED CONTACT QUANTITY | 14 |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END FIRST CONTACT GROUPING NONREMOVABLE |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SECOND CONTACT GROUPING NONREMOVABLE |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 22.0 |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 41.0 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES NOMINAL 1.375 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 1.375 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES NOMINAL 0.812 |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.016 AND SILVER GRAINS, TROY 0.016 |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 |
| AFRE | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 700.0 |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AFRT | SHELL TYPE | SOLID |
| PRMT | PRECIOUS MATERIAL | GOLD AND SILVER |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-5015 |
| AAJD | THREAD CLASS | 2A |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-5015 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES AND SILVER CONTACT SURFACES |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
Supersedes
This item replaces cancelled NIINs 002587945 · 005006826 · 009072330. An older drawing citing one of those numbers resolves here.