NSN 3040-01-119-5250 · NIIN 011195250 · FSC 3040
NO DASHES 3040011195250
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 10.250 |
| ABKZ | EXTERNAL KEYWAY LENGTH | SECOND END INCHES NOMINAL 3.015 |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 0.7500 |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | INCHES NOMINAL 0.500 |
| AMFR | SECOND END KEYWAY WIDTH | INCHES MINIMUM 0.3760 AND INCHES MAXIMUM 0.3780 |
| AMFT | SECOND END KEYWAY DEPTH | INCHES MINIMUM 0.214 AND INCHES MAXIMUM 0.222 |
| AMFW | SECOND END DISTANCE FROM KEYWAY CENTER TO END | INCHES NOMINAL 1.966 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 1.2460 AND INCHES MAXIMUM 1.2480 |
| AMGS | SECOND END HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.1880 |
| ATPC | STEP QUANTITY | 11 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 1.812 |
| CSYM | SURFACE FINISH | MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | SECOND END HAS ONE ADDITIONAL,IDENT,CROSS DRILLED THRU HOLE,0.906 IN. DISTANCE FROM HOLE C TO END,2.000 IN. DISTANCE BTWN HOLE C,180 DEG ANGLE BTWN HOLES,BOTH HOLES COUNTERBORED 0.312 IN. DIA,0.625 IN. DP FROM FAR SIDE;SECOND END HAS CONNECTING PLATE,3.722 IN. DISTANCE FROM END TO PLATE,0.312 IN. PLATE THK,PLATE HAS TWO UNTHD THRU HOLES 0.376/0.378 IN. DIA,PLATE HAS ONE UNTHD THRU HOLE 1.500/1.504 IN. DIA |
| MATT | MATERIAL | STEEL |