FAN,TUBEAXIAL

Name: FAN,TUBEAXIAL
Brand: Atlas Air Supply
SKU: 4140000221176
Availability: LimitedAvailability

Fans, Air Circulators, and Blower Equipment

Technical characteristics

25 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
MATT	MATERIAL	BLADE PLASTIC POLYCARBONATE
AEHY	AMBIENT TEMP AT FULL RATED POWER	CELSIUS 0.0 AND CELSIUS 50.0
AEQC	OPERATING SPEED AT RATED CAPACITY IN RPM	3150.0
AGBD	ELECTRICAL CONNECTION TYPE	TERMINAL
AJLY	STATIC PRESSURE AT SPECIFIED AIR FLOW RATE	INCHES OF WATER (INH20) 0.0
AKCV	DRIVE TYPE	DIRECT
AKDJ	PRIME MOVER TYPE	ELECTRIC MOTOR
FREQ	FREQUENCY IN HERTZ	50.0 AND 60.0
ABBB	SPEED ADJUSTMENTS	SINGLE SPEED
ABRY	LENGTH	INCHES MINIMUM 5.938 AND INCHES MAXIMUM 6.062
AYSY	ROTATION DIRECTION FOR WHICH DESIGNED	COUNTERCLOCKWISE
CQKX	AIR FLOW RATE	CUBIC FEET PER MINUTE MAXIMUM 115.0
CSBH	VOLTAGE IN VOLTS AND CURRENT TYPE	AC 115.0
CSYL	PRIME MOVER POWER RATING	HORSEPOWER 0.054
CWLX	HOUSING INSIDE DIAMETER	INCHES NOMINAL 4.125
CWLY	PRIME MOVER DRIVE SHAFT BEARING TYPE	BALL
FAAZ	PHASE	SINGLE
FEAT	SPECIAL FEATURES	2 FANS MECHANICALLY ASSEMBLED BACK TO BACK; AIR FLOW RATE AT 65 CFM AND 3 IN. WATER STATIC PRESSURE; 4.688 IN. SQ FLANGE BOTH ENDS VENTURI TUBE
ADNK	FLOW DIRECTION	INWARD
ADZC	ENVIRONMENTAL PROTECTION	DUSTPROOF AND FUNGUS RESISTANT AND MOISTURE RESISTANT AND SHOCK PROOF AND VIBRATION PROOF
SFTT	SURFACE TREATMENT	BLADE ENAMEL
STYL	STYLE DESIGNATOR
TEST	TEST DATA DOCUMENT	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 49956-497885-1
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	FLANGE 2 AND UNTHREADED HOLE(S) 8
AKNA	INCLOSURE TYPE	FULLY INCLOSED

5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.