NSN 5905-00-920-8973 · NIIN 009208973 · FSC 5905
NO DASHES 5905009208973
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0980 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 2.200 |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 320.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 60.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 60.00 |
| AEDX | SHAFT STYLE | |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -500.0 TO 500.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FIRST SECTION FREE AIR 1ST SECTION 1.26 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.9900 AND INCHES MAXIMUM 2.0050 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.150 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 320.0 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.932 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.87495 AND INCHES MAXIMUM 1.875 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 2.025 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.750 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 89954-539D818 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 200.00 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -20.0 TO 20.0 AND 2ND SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | SECOND SECTION FREE AIR 2ND SECTION 0.8 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| BYDT | BEARING TYPE | SHAFT BALL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 50.0 AND KILOHMS 2ND SECTION 10.0 |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LEFT ADJACENT SIDE TWO ROWS |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.87495 AND INCHES MAXIMUM 1.8750 |
| AEFY | SHAFT END PLAY | INCHES 0.001 |