NSN 5990-00-782-1290 · NIIN 007821290 · FSC 5990
NO DASHES 5990007821290
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJTX | COMPENSATION METHOD | NETWORK COMPENSATED |
| AJVA | ZCO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 2490.00 |
| AJVB | ZCO IMPEDANCE ANGLE IN DEG | NOMINAL 79.30 |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | MINIMUM 399.50 AND MAXIMUM 540.50 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 5.0 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 233.75 AND MAXIMUM 316.25 |
| FEAT | SPECIAL FEATURES | 0.05 PERCENTOUTPUT VOLTAGE FUNCTIONAL ERROR RATE IN PERCENT |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 12 |
| AJSL | BODY SIZE | 11 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 5.500 AND INPUT TO OUTPUT MAXIMUM 11.500 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 1.000 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.5 TO 3.5 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | MINIMUM 331.50 AND MAXIMUM 448.50 |
| AJSY | ZSO RESISTANCE IN OHMS | MINIMUM 318.75 AND MAXIMUM 431.25 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 276.25 AND MAXIMUM 373.75 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| ABWV | SHAFT DIAMETER | FRONT SHAFT INCHES MINIMUM 0.1245 |
| AJVE | COMPENSATOR RESONANT FREQUENCY IN HERTZ | 70000.0 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3750 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0450 AND INCHES MAXIMUM 0.0670 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES NOMINAL 0.33 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES NOMINAL 0.11 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.9700 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.3450 |
| ABWV | SHAFT DIAMETER | REAR SHAFT INCHES MAXIMUM 0.1247 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |