NSN 5905-00-556-5306 · NIIN 005565306 · FSC 5905
NO DASHES 5905005565306
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CBBL | FEATURES PROVIDED | PANEL SEAL |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AAPN | SECTION QUANTITY | 1 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94 |
| AAQL | BODY STYLE | |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.312 AND INCHES MAXIMUM 1.656 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.032 AND INCHES MAXIMUM 1.156 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.844 AND INCHES MAXIMUM 0.906 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 5 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.432 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.468 AND INCHES MAXIMUM 0.750 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.515 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.515 AND INCHES MAXIMUM 0.547 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 309.0 AND MAXIMUM 320.0 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | SHAFT AND STANDARD BUSHING |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
Supersedes
This item replaces cancelled NIINs 002593898 · 007211407 · 008098677. An older drawing citing one of those numbers resolves here.