NSN 5905-00-880-0942 · NIIN 008800942 · FSC 5905
NO DASHES 5905008800942
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.182 AND INCHES MAXIMUM 0.197 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AEDX | SHAFT STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.515 AND INCHES MAXIMUM 0.555 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-27208 TO 4 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-27208 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.058 AND INCHES MAXIMUM 0.098 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.025 AND INCHES MAXIMUM 0.045 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 7200.0 AND MAXIMUM 16200.0 |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.513 AND INCHES MAXIMUM 0.526 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 7200.0 AND MAXIMUM 16200.0 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.078 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
Supersedes
This item replaces cancelled NIIN 008562922. An older drawing citing one of those numbers resolves here.