NSN 5905-00-689-9608 · NIIN 006899608 · FSC 5905
NO DASHES 5905006899608
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.0 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.300 AND INCHES MAXIMUM 1.340 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.531 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.130 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.080 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.270 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.890 AND INCHES MAXIMUM 0.910 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.995 AND INCHES MAXIMUM 1.005 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.769 AND INCHES MAXIMUM 0.861 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.088 AND INCHES MAXIMUM 0.098 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-27208 TO 8 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 8.00 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.240 AND INCHES MAXIMUM 1.250 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.200 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.330 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-27208 |
| AEDX | SHAFT STYLE | |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.200 |
Supersedes
This item replaces cancelled NIIN 009635564. An older drawing citing one of those numbers resolves here.