NSN 5935-00-902-2936 · NIIN 009022936 · FSC 5935
NO DASHES 5935009022936
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRMT | PRECIOUS MATERIAL | GOLD |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.125 |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC ALL TREATMENT RESPONSES QQ--416,TY 2,CL 3 |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END ALL CONTACT GROUPINGS REMOVABLE |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 600.0 |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.047 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END ALL CONTACT GROUPINGS ROUND PIN |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 1.453 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 1.453 |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND THERMAL SHOCK RESISTANT AND CORROSION RESISTANT |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-591 |
| CXCG | INCLUDED CONTACT QUANTITY | 2 |
| CXCG | INCLUDED CONTACT QUANTITY | 37 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.556 AND INCHES MAXIMUM 0.587 |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-26482 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S3120 |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.709 |
| AWTN | OPERATING TEMP RATING | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END ALL CONTACT GROUPINGS BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END ALL CONTACT GROUPINGS COPPER ALLOY |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END ALL CONTACT GROUPINGS GOLD AND NICKEL |
| CQZG | INSERT MATERIAL | SINGLE MATING END PLASTIC |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END ALL CONTACT GROUPINGS MIL SPEC 1ST TREATMENT RESPONSE -IL-G-45204,TY 2,GRADE C,CL 1 AND FED SPEC 2ND TREATMENT RESPONSE QQ-N-290,CL 2 |
| CSCF | TERMINAL TYPE | SINGLE MATING END ALL CONTACT GROUPINGS CRIMP |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 1.156 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES NOMINAL 1.156 |