NSN 5905-00-764-1180 · NIIN 007641180 · FSC 5905
NO DASHES 5905007641180
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.513 AND INCHES MAXIMUM 0.526 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MAXIMUM 16200.0 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.058 AND INCHES MAXIMUM 0.098 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.515 AND INCHES MAXIMUM 0.555 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-27208 |
| AAPN | SECTION QUANTITY | 1 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.182 AND INCHES MAXIMUM 0.197 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AEDX | SHAFT STYLE | |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MAXIMUM 16200.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 8.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 8.00 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-27208 TO 4 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.025 AND INCHES MAXIMUM 0.045 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.098 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.182 AND INCHES MAXIMUM 0.197 |
| AAQL | BODY STYLE |
Supersedes
This item replaces cancelled NIIN 004787616. An older drawing citing one of those numbers resolves here.