NSN 5990-00-851-2793 · NIIN 008512793 · FSC 5990
NO DASHES 5990008512793
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
51 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.5900 AND INCHES MAXIMUM 0.6000 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 75.0 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 4.2940 |
| AJTE | ZSO-90 RESISTANCE IN OHMS | NOMINAL 206.00 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 485.00 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 1.6 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.6930 AND INCHES MAXIMUM 0.7190 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 236.00 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9900 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 100.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.50 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.20 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0360 AND INCHES MAXIMUM 0.0460 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 3.4450 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3100 AND INCHES MAXIMUM 0.3300 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1590.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 796.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 167.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, THREADED |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9900 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.6420 |
| CTDW | PLUS J ZSO-90 REACTANCE IN OHMS | NOMINAL 271.00 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.2500 |
| FEAT | SPECIAL FEATURES | SLOTTED KEYWAY FULL LENGTH OF SHAFT |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 94 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2490 AND INCHES MAXIMUM 2.2500 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 217.00 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 75.00 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AAZX | SECOND SHOULDER LENGTH | INCHES MINIMUM 0.1680 AND INCHES MAXIMUM 0.1700 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 45.0 |
| AJSL | BODY SIZE | 23 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.2480 AND INCHES MAXIMUM 0.2500 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.2500 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2402 AND INCHES MAXIMUM 0.2405 |
Supersedes
This item replaces cancelled NIINs 003513353 · 005030599 · 007739989. An older drawing citing one of those numbers resolves here.