NSN 2010-01-021-9542 · NIIN 010219542 · FSC 2010
NO DASHES 2010010219542
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZR | MAJOR DIAMETER | INCHES NOMINAL 1.500 |
| ABET | THREAD LENGTH | INCHES 2.625 |
| ABGL | WIDTH | INCHES MINIMUM 0.499 AND INCHES MAXIMUM 0.500 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 9.833 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 2.000 |
| ABND | TAPER LENGTH | FEET NOMINAL 0.479 |
| ABQB | TAPER MAJOR DIAMETER | INCHES NOMINAL 2.000 |
| ABRR | KEYWAY WIDTH | INCHES MINIMUM 0.499 AND INCHES MAXIMUM 0.500 |
| ABRV | KEYWAY DEPTH | INCHES MINIMUM 0.251 AND INCHES MAXIMUM 0.254 |
| AEJZ | DEPTH | INCHES MINIMUM 0.251 AND INCHES MAXIMUM 0.254 |
| AEVE | KEYWAY QUANTITY | 1 |
| APQB | UNIT TYPE | PROPELLER SHAFT SECTION |
| BPJZ | USAGE LOCATION | PORT/STARBOARD |
| CPHM | FORWARD END DESIGN | STRAIGHT |
| CPHX | FORWARD END DIAMETER | INCHES NOMINAL 2.000 |
| CPTC | AFTER END DESIGN | TAPERED |
| CQCF | CONSTRUCTION | SOLID |
| CQRN | THREAD QUANTITY | PER INCH 6 |
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 0.750 |
| FEAT | SPECIAL FEATURES | KEYWAY ON AFT AND FORWARD END IS 4 1/4 INCHES MIN. LENGTH. SHAFT EXTENDS 1/2 INCH PAST THREADED PROPELLER HEAD WITH A 13/64 INCH HOLE DRILLED FOR A 3/16 INCH COTTER PIN FOR EXTRA SAFTEY OF LOCKNUT ON AFT END |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| NMBR | QUANTITY | 1 |