NSN 3020-01-123-1670 · NIIN 011231670 · FSC 3020
NO DASHES 3020011231670
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.6462 |
| AJLA | TEETH QUANTITY | 16 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 52.0 AND ROCKWELL C MAXIMUM 55.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.050 |
| CWNH | TOOTH FORM | SPECIAL |
| CWPP | PRESSURE ANGLE | DEGREES 22.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.190 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.860 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.375 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.251 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.812 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.900 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-46850,TYE 3,GRADE 300 |
| STYL | STYLE DESIGNATOR |