NSN 2010-01-015-1534 · NIIN 010151534 · FSC 2010
NO DASHES 2010010151534
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZR | MAJOR DIAMETER | INCHES NOMINAL 14.000 |
| ABET | THREAD LENGTH | INCHES 12.000 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 37.000 |
| ABND | TAPER LENGTH | FEET NOMINAL 3.500 |
| ABQB | TAPER MAJOR DIAMETER | INCHES MINIMUM 22.998 AND INCHES MAXIMUM 23.000 |
| AEJZ | DEPTH | INCHES MINIMUM 1.843 AND INCHES MAXIMUM 1.853 |
| AKYN | FURNISHED ITEMS AND QUANTITY | PROPELLER NUT 1,PROPELLER KEY 2,PIPE PLUG 1,PLUG 1 |
| APQB | UNIT TYPE | PROPELLER SHAFT SECTION |
| APZX | PROTECTIVE COVERING TYPE | RUBBER, SYNTHETIC |
| CPJH | FORWARD END COUPLING DESIGN | INTEGRAL |
| CPJK | FORWARD END COUPLING OUTSIDE DIAMETER | INCHES MINIMUM 37.245 AND INCHES MAXIMUM 37.250 |
| CPJM | FORWARD END COUPLING THICKNESS | INCHES MINIMUM 4.615 AND INCHES MAXIMUM 4.625 |
| CPTC | AFTER END DESIGN | TAPERED |
| CPTF | FORWARD BEARING SLEEVE OUTSIDE DIAMETER | INCHES MINIMUM 24.745 AND INCHES MAXIMUM 24.750 |
| CPTG | FORWARD BEARING SLEEVE LENGTH | FEET NOMINAL 0.917 |
| CPTH | AFTER BEARING SLEEVE OUTSIDE DIAMETER | INCHES MINIMUM 24.745 AND INCHES MAXIMUM 24.750 |
| CPTP | AFTER BEARING SLEEVE LENGTH | FEET NOMINAL 11.750 |
| CPTS | COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES |
| CQCF | CONSTRUCTION | HOLLOW |
| CQRN | THREAD QUANTITY | PER INCH 4 |
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 1.000 |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-23284, CLASS 3 |
| NMBR | QUANTITY | 2 |