NSN 3110-00-222-0582 · NIIN 002220582 · FSC 3110
NO DASHES 3110002220582
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0004 AND INCHES MAXIMUM RADIAL 0.0005 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| FEAT | SPECIAL FEATURES | ALTERNATE OD CONFIGERATION AS FOLLOWS - STRAIGHT KNURL 16 TEETH PER INCH-2 GROOVES LOCATED 0.075 IN. FROM EACH RING FACE |
| MATT | MATERIAL | OVERALL STEEL COMP E52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| STYL | STYLE DESIGNATOR | |
| ABMK | OVERALL WIDTH | MILLIMETERS NOMINAL 12.0 |
| ABXV | BORE DIAMETER | MILLIMETERS NOMINAL 17.00 |
| ADGA | OVERALL OUTSIDE DIAMETER | MILLIMETERS NOMINAL 40.00 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYK | SHIELD QUANTITY | 1 |
Supersedes
This item replaces cancelled NIIN 011760806. An older drawing citing one of those numbers resolves here.