NSN 5306-00-825-1332 · NIIN 008251332 · FSC 5306
NO DASHES 5306008251332
In Stock
BOLT,MACHINE
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.203 AND INCHES MAXIMUM 0.234 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.070 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.046 AND INCHES MAXIMUM 0.078 |
| BQDM | HOLE TYPE | DRILLED |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| ASXK | HOLE QUANTITY | 6 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6050 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6098 OR ASSN STD 4TH MATERIAL RESPONSE A-S 6300 OR MIL SPEC 5TH MATERIAL RESPONSE -IL-S-6758 OR MIL SPEC 6TH MATERIAL RESPONSE -IL-S-5626 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.454 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.453 AND INCHES MAXIMUM 0.500 |
| AASK | HEAD STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY2 CL3 |
| CBBL | FEATURES PROVIDED | FINISHED HEAD |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| MATT | MATERIAL | OVERALL STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 4140 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
Supersedes
This item replaces cancelled NIINs 001510423 · 002977604. An older drawing citing one of those numbers resolves here.