NSN 5305-00-941-3618 · NIIN 009413618 · FSC 5305
NO DASHES 5305009413618
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BQDM | HOLE TYPE | DRILLED |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 120000 |
| AASA | THREAD LENGTH | INCHES MAXIMUM 0.500 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.470 AND INCHES MAXIMUM 0.500 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.438 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.062 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ASXK | HOLE QUANTITY | 1 |
| AASK | HEAD STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 5 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 85000 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.163 |
| MATT | MATERIAL | OVERALL STEEL |
| CRHC | HOLE CONFIGURATION STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 23.0 AND ROCKWELL C MAXIMUM 32.0 |
Supersedes
This item replaces cancelled NIINs 000970390 · 002829816 · 004453806. An older drawing citing one of those numbers resolves here.