NSN 3020-00-420-5976 · NIIN 004205976 · FSC 3020
NO DASHES 3020004205976
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.0000 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 1.344 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.219 |
| ABSA | SPLINE QUANTITY | 6 |
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.166 |
| CWNH | TOOTH FORM | SPECIAL |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.984 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.906 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.250 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 9 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.531 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.094 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.250 |
| MATT | MATERIAL | OVERALL STEEL COMP 8620 |
| STYL | STYLE DESIGNATOR | |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.312 |
| AAQL | BODY STYLE |
Supersedes
This item replaces cancelled NIINs 008726434 · 012388803. An older drawing citing one of those numbers resolves here.