NSN 4320-01-102-6981 · NIIN 011026981 · FSC 4320
NO DASHES 4320011026981
In Stock
MOTOR,HYDRAULIC
Power and Hand Pumps
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPL | TORQUE LOAD RATING | INCH-POUNDS 30.0 |
| AAUH | SPLINE MINOR DIAMETER | INCHES MINIMUM 0.346 AND INCHES MAXIMUM 0.351 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.414 |
| AAXX | MOUNTING TYPE | FLANGE |
| ABSA | SPLINE QUANTITY | 12 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.276 AND INCHES MAXIMUM 0.291 |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 2500.0 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.049 AND INCHES MAXIMUM 0.051 |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| ASAP | SPLINE PITCH | 32/64 |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000PSI AT MINUS 54 DEG C TO PLUS71 DEG C |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AXFH | SPLINE LENGTH | INCHES MINIMUM 0.627 AND INCHES MAXIMUM 0.677 |
| AXFP | DISPLACEMENT TYPE | CONSTANT OR VARIABLE |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | CUBIC INCHES 0.040 |