NSN 4320-01-182-0200 · NIIN 011820200 · FSC 4320
NO DASHES 4320011820200
In Stock
PUMP,RECIPROCATING
Power and Hand Pumps
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXZ | CYLINDER QUANTITY | 9 |
| AAYT | INTAKE CONNECTION QUANTITY | 1 |
| AAYU | INTAKE CONNECTION TYPE | THREADED INTERNAL |
| AAYV | DISCHARGE CONNECTION QUANTITY | 1 |
| AAYW | DISCHARGE CONNECTION TYPE | THREADED INTERNAL |
| AAYX | DRIVE CONNECTION TYPE | GEAR |
| AENG | PUMPING ELEMENT TYPE | PISTON |
| AHYV | MAXIMUM DISCHARGE FLOW RATE | GALLONS PER MINUTE 0.5 |
| AHYW | DISCHARGE PRESSURE | POUNDS PER SQUARE INCH GAUGE (PSIG) 3000.0 |
| AHZJ | PUMP RECIPROCATING DESIGN | SINGLE ACTING |
| AHZN | RECIPROCATING STROKE TYPE | FIXED |
| AHZP | VOLUME CONTROL TYPE | PRESSURE COMPENSATION |
| AJAB | DRIVE SHAFT TYPE | SPLINED, STRAIGHT EXTERNAL |
| AJAC | DRIVE SHAFT END DIAMETER | INCHES NOMINAL 0.497 |
| AJAD | DRIVE SHAFT LENGTH | INCHES NOMINAL 0.500 |
| APHE | OPERATION METHOD | POWERED |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| FEAT | SPECIAL FEATURES | ITEMS ARE BEING CODED AS CRITICAL TO INSURE SOURCE INSPECTION WILL BE PERFORMED AT THE POINT OF MANUFACTURE, PRIOR TO MATERIAL RECEIPT BY THE US NAVY OR OTHER DOD COMPONENTS. THESE ITEMS ARE PIECE PARTS OR END ITEMS IN SUPPORT OF VITAL MILITARY HARDWARE NECESSARY TO SUSTAIN THE SUCCESSFUL MISSION OF THE SHIPS, SUBMARINES, AND SHORE STATIONS OF THE US NAVY. CRITICAL FEATURES INCLUDING, BUT NOT LIMITED TO, DIMENSIONS, TOLERANCES/CLEARANCES, ELECTRONIC CHARACTERISTICS, AND METALLURGICAL PROPERTIES WILL BESPECIFIED FOR GOVERNMENT Q AR (QUALITY ASSURANCE REPRESENTATIVES) TO INSURE THE HIGHEST POSSIBLE DEGREE OF QUALITY AND RELIABILITY OF THESE PARTS BEING DELIVERED UNDER NAVICP CONTRACTS |
| MEDA | MEDIA FOR WHICH DESIGNED | LOCATION NOT OTHERWISE SPECIFIED FUEL/OIL, HYDROCARBON |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6332D495-1 | 36334 |
| 53028 | 59211 |
| 6532D326-1 | 80020 |