NSN 4320-01-451-0125 · NIIN 014510125 · FSC 4320
NO DASHES 4320014510125
In Stock
MOTOR,HYDRAULIC
Power and Hand Pumps
Application: WEAPONS CODE DJF, TRACTOR, FLIGHTLINE TOWING
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAPL | TORQUE LOAD RATING | INCH-POUNDS 7470.0 |
| AAUH | SPLINE MINOR DIAMETER | INCHES NOMINAL 0.850 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.998 |
| AAXX | MOUNTING TYPE | FLANGE |
| ABSA | SPLINE QUANTITY | 6 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.535 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ABUJ | THREAD SIZE | 0.875-14 AND 0.875-4 AND 0.4375-20 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 153.0 |
| AFFL | MOUNTING BOLT CIRCLE DIAMETER | INCHES NOMINAL 4.190 |
| AGAV | END ITEM IDENTIFICATION | WEAPONS CODE DJF, TRACTOR, FLIGHTLINE TOWING |
| AGVN | SHAFT THREAD SIZE | 0.250-20 |
| AJAB | DRIVE SHAFT TYPE | SPLINED, STRAIGHT EXTERNAL AND THREADED |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND |
| AKAL | SHAFT SCREW THREAD LENGTH | INCHES NOMINAL 0.600 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| APJC | THREAD LOCATION | OVERALL INTERNAL |
| ARQA | SHAFT PROTRUSION LENGTH | INCHES NOMINAL 1.130 |
| ASMM | CONNECTION QUANTITY | 3 |
| AWLS | CONNECTION TYPE | INLET AND OUTLET AND DRAIN |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 1750PSI |
| AXFC | CONNECTION DESIGN | THREADED |
| AXFH | SPLINE LENGTH | INCHES NOMINAL 0.896 |
| AXFN | MOUNTING GOVERNMENT STANDARD | SAE A |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | CUBIC INCHES 18.710 |
| AZFE | CONNECTION GOVERNMENT SPEC/STD | SAE J1926 |
| FEAT | SPECIAL FEATURES | SHAFT SPLINE PER SAE J499 6B; USED IN THROAT ASSY OF PAVEMENT REPAIR SYSTEM |
| MATT | MATERIAL | HOUSING STEEL |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 9310C | 20722 |
| 9310C4601-001 | 20722 |
| M0219C05A0000F 104-1021-006 | 22841 |
| M0219C05A0000F 104-1021-006 | 9G527 |
| 104-1021-006 | 9G527 |