NSN 4330-01-335-0417 · NIIN 013350417 · FSC 4330
NO DASHES 4330013350417
In Stock
FILTER,FLUID
Centrifugals, Separators, and Pressure and Vacuum Filters
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | HEAD UNTHREADED HOLE |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.562 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES NOMINAL 5.500 |
| ADAT | BODY WIDTH | INCHES NOMINAL 5.500 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 14.562 |
| ADNH | FILTRATION RATING IN MICRONS | NOMINAL 10.0 |
| ADNP | DROP PRESSURE | POUNDS PER SQUARE INCH (PSI) 12.0 |
| AFQM | DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 4.000 |
| APGF | DESIGN TYPE | REUSABLE |
| CBBL | FEATURES PROVIDED | AIR BLEED VALVE AND BY-PASS VALVE AND DIFFERENTIAL PRESSURE INDICATOR AND DRAIN PLUG |
| CCZM | FILTERING ELEMENT QUANTITY | 1 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 2500.0 |
| CRXW | FILTERING MEDIA DESIGN | SINGLE FILTERING MEDIA RESPONSE PLEATED |
| CRXZ | FIRST INTAKE CONNECTION TYPE | HEAD SIDE THREADED INTERNAL TUBE |
| CSJR | FIRST DISCHARGE CONNECTION RELATIONSHIP TO INTAKE CONNECTION | IDENTICAL TO FIRST INTAKE CONNECTION |
| CSKY | DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET | INCHES NOMINAL 1.250 |
| CTDY | FIRST INTAKE THREAD SERIES DESIGNATOR | UN |
| CTGK | FIRST INTAKE NOMINAL THREAD SIZE | INCHES 1.625 |
| CWAR | FIRST INTAKE THREAD QUANTITY PER INCH | 12 |
| CWNZ | FIRST INTAKE THREAD CLASS | 3B |
| CXPF | FIRST INTAKE THREAD DIRECTION | RIGHT-HAND |
| CXZX | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| FEAT | SPECIAL FEATURES | INVERTED DESIGN,HEAD ON BOTTOM,CONTAINER HAS STEEL CAP; ELECTRIC SEITCH DIRT ALARM |
| MATT | MATERIAL | BODY STEEL |
| MATT | MATERIAL | FILTERING MEDIUM CELLULOSE |
| MATT | MATERIAL | CONTAINER/CARTRIDGE STEEL |
| MATT | MATERIAL | SEAL RUBBER BUNA N |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| STYL | STYLE DESIGNATOR |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JF20-1J10-S | 08832 |
| JF20-1J10-S-MS | 08832 |