NSN 4330-01-373-0135 · NIIN 013730135 · FSC 4330
NO DASHES 4330013730135
In Stock
FILTER,FLUID
Centrifugals, Separators, and Pressure and Vacuum Filters
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | HEAD SIDE OUTLET CONNECTION AND INLET CONNECTION AND UNTHREADED HOLE |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.345 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 3.750 |
| ADAT | BODY WIDTH | INCHES NOMINAL 2.750 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 8.000 |
| ADNH | FILTRATION RATING IN MICRONS | ABSOLUTE 3.0 AND NOMINAL 10.0 |
| AFQM | DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 2.000 |
| APGF | DESIGN TYPE | REUSABLE |
| AZKQ | TEMP RATING | FAHRENHEIT MINIMUM -40.0 AND FAHRENHEIT MAXIMUM 250.0 |
| CCZM | FILTERING ELEMENT QUANTITY | 1 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 5000.0 |
| CRXW | FILTERING MEDIA DESIGN | SINGLE FILTERING MEDIA RESPONSE PLEATED |
| CRXZ | FIRST INTAKE CONNECTION TYPE | HEAD SIDE THREADED INTERNAL TUBE |
| CSJR | FIRST DISCHARGE CONNECTION RELATIONSHIP TO INTAKE CONNECTION | IDENTICAL TO FIRST INTAKE CONNECTION |
| CSKY | DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET | INCHES NOMINAL 6.470 |
| CTDY | FIRST INTAKE THREAD SERIES DESIGNATOR | UN |
| CTGK | FIRST INTAKE NOMINAL THREAD SIZE | INCHES 0.500 |
| CWAR | FIRST INTAKE THREAD QUANTITY PER INCH | 8 |
| CXPF | FIRST INTAKE THREAD DIRECTION | RIGHT-HAND |
| CXZX | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| FEAT | SPECIAL FEATURES | 5000.0PSI; COLLAPSE 3000.0PSI; 10.0GPM; 300.0SCFM |
| MATT | MATERIAL | FILTERING MEDIUM CELLULOSE |
| MATT | MATERIAL | BODY ALUMINUM ALLOY 2024 |
| MATT | MATERIAL | SEAL RUBBER BUNA N |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY FED SPEC SINGLE MATERIAL RESPONSE QQ-A-200 TO 3 |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON OR AIR |
| STYL | STYLE DESIGNATOR | |
| SUPP | SUPPLEMENTARY FEATURES | HEX WRENCHING FACILITY ON BOTTOM |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6509872-1 | 53711 |
| 6509872 | 53711 |
| U-10185 | 59165 |
| 4545AA-03RL | 59165 |