NSN 5950-01-331-3921 · NIIN 013313921 · FSC 5950
NO DASHES 5950013313921
In Stock
TRANSFORMER,POWER
Coils and Transformers
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 4.470 AND INCHES MAXIMUM 4.550 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP INCHES MINIMUM 3.740 AND INCHES MAXIMUM 3.760 |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP INCHES MINIMUM 2.990 AND INCHES MAXIMUM 3.010 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 3.720 AND INCHES MAXIMUM 3.800 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 3.550 AND INCHES MAXIMUM 3.800 |
| ABTB | MOUNTING HOLE DIAMETER | SINGLE GROUP INCHES MINIMUM 0.208 AND INCHES MAXIMUM 0.228 |
| ACZB | FREQUENCY RATING | SINGLE COMPONENT HERTZ MINIMUM 45.0 AND HERTZ MAXIMUM 66.0 |
| ACZC | INPUT-OUTPUT PHASE RELATIONSHIP | SINGLE COMPONENT SINGLE PHASE TO SINGLE PHASE |
| ACZX | WINDING SHIELDING METHOD | SINGLE COMPONENT INTERNAL SHIELD BROUGHT OUT TO TERMINAL |
| AEHZ | MAXIMUM OPERATING TEMP | CELSIUS 155.0 |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| AXGY | MOUNTING METHOD | SINGLE GROUP UNTHREADED HOLE(S) |
| BPLC | WINDING FUNCTION AND QUANTITY | SINGLE COMPONENT PRIMARY 1 AND SECONDARY 1 |
| CRBZ | WINDING OPERATING CURRENT | SINGLE COMPONENT SINGLE SECONDARY AMPERES AC NOMINAL 18.0 |
| CRMJ | WINDING POWER RATING | SINGLE COMPONENT SINGLE SECONDARY VOLTS-AMPERES 504.0 |
| CWJS | WINDING OPERATING VOLTAGE | SINGLE COMPONENT SINGLE PRIMARY AC VOLTS NOMINAL 115.00 |
| CWJS | WINDING OPERATING VOLTAGE | SINGLE COMPONENT SINGLE SECONDARY AC VOLTS NOMINAL 28.00 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 13973-841354 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 5 |