NSN 3020-00-682-3867 · NIIN 006823867 · FSC 3020
NO DASHES 3020006823867
In Stock
GEAR,ANTIBACKLASH,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 0.500 |
| CWXG | SECOND STEP NOMINAL LENGTH | FIRST END INCHES 0.070 |
| CWXL | SECOND STEP NOMINAL DIAMETER | FIRST END INCHES 0.880 |
| FEAT | SPECIAL FEATURES | 0.280 IN.CLAMPING SURFACE LG ON BOTH HUB ENDS AND 0.060 IN.WIDE 0.298 IN. DIA GROOVES ON BOTH ENDS,0.250 IN.FROM END |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.021 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.380 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 0.530 |
| CWWN | END NOMINAL DIAMETER | BOTH ENDS INCHES 0.310 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.267 |
| ABSX | ATTACHMENT METHOD | INTERNAL RING GROOVE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.1250 |
| AJLA | TEETH QUANTITY | 150 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.538 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.875 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.551 |
| STYL | STYLE DESIGNATOR | |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.530 |
| CWNH | TOOTH FORM | STANDARD |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.104 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T4 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625,TYE 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.1666 |